How to assembly
1. Insert the wand into the motorised floor nozzle connector, pressing it in until it clicks into place.
2. Insert the handheld vacuum into the top of the wand, pressing it in until it clicks into place.
3. Snap accessory storage clip onto the wand. Store one accessory on top holder and one accessory on bottom holder
How to use motorised floor nozzle
1. Plug the unit in and recline the wand.
2. Slide the power switch to appropriate speed setting (I or II) and start cleaning.
Bare Floor, Area Rugs (I) – The brushroll and the Soft Roller both spin together slowly to clean bare floors and delicate area rugs. The Soft Roller traps fine dust and large particles, while the brushroll directs that debris to the suction channel. High Pile Carpets (II) – Both brushrolls spin faster, working together to pick up debris below the surface of your carpets.
How to use above floor-mode
Wand
1. Stand the vacuum upright. Step on the foot pedal and pull the wand up to disconnect it from the motorised floor nozzle.
2. Attach desired cleaning accessory.
Handheld
1. Press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.
2. Attach desired cleaning accessory.
Storage
Press the Wand Release button on the top of the wand to release the handheld vacuum. Align the catch on the bottom of the handheld vacuum with the storage hook on the wand. Slide handheld vacuum down so that it hangs from the storage hook. Wrap the cord around the two cord hooks.