How to assembly
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
3. Snap the Accessory Holder onto the wand, then place accessories in the holder.
Ensure all connections click securely into place.
What are the settings
O
Press the power button to begin vacuuming. To turn off power, press button again.
I Bare Floor/Small Area Rugs
The brushrolls spin slowly to clean bare floors and small area rugs.
II Carpet
The brushrolls spin faster to pick up debris below the surface of your carpets.
What are the cleaning modes
Floor Mode
To clean floors, place foot on floor nozzle and tilt handheld vacuum back.
Above-Floor with Wand
Detach the nozzle for more reach to clean baseboards, ceiling fans, window sills, and
other hard-to-access areas. To disconnect the wand, stand the vacuum upright. Step
on the foot pedal on the side of the nozzle, then pull the wand out of the nozzle.
Above Floor Handheld
To use in Hand Vac mode, press the Wand Release button and lift the handheld vacuum off the wand. Great for cleaning stairs, furniture, and countertops.
Using the Multiflex wand
Press the unlock latch on the back of the wand, then adjust the angle.
Adjust the wand to a lower angle to easily clean under furniture.
Storage
Looking at the vacuum from the side with the cord hooks, wrap the power cord anti-clockwise around
the hooks, starting under the bottom hook. Then press the MultiFLEX Wand Lock Release button
and gently fold the handheld vacuum forward toward the floor nozzle. Use the handle to carry the
vacuum to its storage location.
To take the vacuum out of storage mode, press the MultiFLEX Wand Lock Release button while lifting
up the handheld vacuum. When straightened, the wand will lock in place.