Emptying the dust cup
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line.
Press the wand release button and lift the handheld vacuum off the wand.
To remove the dust cup from the handheld vacuum, squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup.
Hold the dust cup over the trash. Press the Empty button and pull the dust cup open.
How to clean the filters
Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
To prevent damage, rinse filters with water ONLY. DO NOT use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
The Pre-Motor Filters should be washed once a month.
The Post-Motor Filter should be washed once every 9 months.
How to check for blockage
Check handheld
Remove the handheld vacuum from the wand and check all dust cup intake openings.
Check wand
Detach the wand and check it for blockages.
Check Floor Nozzle
Detach the wand, then remove the Soft Roller.
Tilt the floor nozzle tube back and check openings for blockages. Reinsert Soft Roller until it clicks securely into place.
Remove any blockages or debris from the floor nozzle debris intake
Maintaining nozzle
If you notice any hair wrap, continue vacuuming and the Self-Cleaning Brushroll
will automatically remove it. If some hair wrap remains after continued use, remove
the brushroll cover from the bottom of the nozzle and use scissors to carefully cut away
the hair.
To remove the cover, use a coin to turn the locks counterclockwise. Lift off the cover
and remove any debris or hair wrap. Check the Debris Intake and clear away any dirt or
blockages.
To close the cover, push down until it clicks into place, then turn the locks clockwise
until closed.
Cleaning the soft roller
1. To remove the Soft Roller, slide the Eject Roller button on the floor nozzle.
2. Tap loose debris off the Soft Roller. Use a dry towel to wipe it clean, and to remove any debris
caught in the teeth behind the Soft Roller.
3. Hand-wash the Soft Roller as needed. Use only water, and let it air-dry completely for at least
24 hours.
4. Reinsert the Soft Roller and press it in until it clicks securely into place.